- Артикул: 41077
- Серийный номер: EX2-1055
- EAN: 8295969063490
- Вес: 4,51 кг
Дата поставки неизвестна
Все цены вкл. НДС без стоимости доставки
|Размер радиатора:||3x120 мм|
The Exos series from Koolance is a complete external water cooling solution!
The Koolance Exos 2.5 differs from the other cooling systems mainly by the PMP-400 (Laing DDC-1T) pump. This kit is very powerful and can handle a cooling load of up to 1000 Watts!
What makes this kit so special?
A complete concept to make installation of a water cooling system as easy as possible: This was the goal when designing this system. The basic components pump, reservoir, radiator and fan are mounted under the top plate. At the bottom of the unit rubber feet are integrated to prevent scratching of the PC enclosure. The beautiful enclosure of the Exos series makes any system look more beautiful. Besides the basic components an additional fan controller is installed. With this controller unit the fan speed or a target temperature can be set to be kept automatically. This kit is equipped with 2x G1/4" connection threads at the rear. This allows the connection tubing to be routed at the back of the enclosure. Additionally a DVI connector to allow connection of the included power supply cable. Tubing and cable lead through a slot cover. The tubing can be looped through with up to 14mm outer diameter or can be connected with a bulkhead connector. The DVI cable is connected with a electronics board which is used for power supply via a 4-Pin Molex power connector and is equipped with temperature sensors (sensors included). A cable for emergency shut-off can also be connected optionally. Everything is explained in a detailed, illustrated English mounting manual as well.
- Now with 10kOhm temperature sensors
- automatically adjusted fan speed or manually controllable in 10 steps
- pump speed adjustable
- Variable temperature alarms with three independent sensors and switch-off
- Blue reservoir lighting
- Adapted power connector - needs no power socket
- 360mm radiator with 3x 120mm fan
- Filling opening on top
The Koolance system does not contain water blocks for CPU, HDD, graphics card or Mainboard. To use the system at least a CPU water block is needed. All other components which are needed for a water cooling system (radiator, pump, display) are already installed in the system, Additionally fittings and tubing are needed to connect the system with the water blocks.
Warning: Please note that the Koolance guarantee only remains valid if this product is operated with distilled water (pure water) or with water additives and / or finished mixtures of the following manufacturers: Koolance, Alphacool, Aquacomputer, Innovatek and Phobya. If other liquids are used the warranty may no longer be given.
Materials: Aluminium enclosure, Plexiglas front plate
Connection thread size: 1/4"
Tubing size: 13mm, 10mm or 6mm inner diameter
Dimensions (WxHxD): 21,3cm x 9.5cm x 56.5cm
Conforms with RoHS
Extent of delivery:
Cooling system (pump, reservoir, radiator, fan, controller unit, LED display etc.)
English illustrated manual
Slot cover adaptor
3 temperature sensors
Please note: Due to the low thread depth of only 5mm some fittings may require spacer rings (Item No. 14087, 14151 or 95008)