Alphacool’s Eiszapfen series is forward-looking and distinguishes itself through its exceptional design and high flow rate.
The Alphacool Eiszapfen deep black brass filter is ideal for water cooling systems with microstructure coolers. The filter prevents the microstructure coolers from becoming clogged, since these coolers are often difficult to clean manually due to their small size.
The filter is constructed so that there is no resistance through the mesh; the opposite, in fact: the flow rate of the filter is around 50% higher than a tube with an 8mm inner diameter and around 30% higher than a tube with a 10mm inner diameter. This makes the filter ideal for high-flow systems. Only once the filter is more than 30% to 50% clogged does a reduction in flow rate kick in.
This filter is available in three different colours: chrome, deep black and now also in plexi.
- Dimensions (LxD): 20 x 25mm
- Material: deep black brass
- Filter: stainless steel fibre microfilter
- Flow rate reduction only after very clogged (30% to 50%)
- Connector thread: 2x G1/4 inch
Scope of Delivery
- 1x Alphacool Eiszapfen Filter G1/4 IG - Deep Black
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Нажмите здесь, чтобы отобразить этот вопрос (ы).