Your watercooling and modding distributor Your watercooling and modding distributor

Phobya quick release connector kit 13/10mm bulkhead

  • 65031
  • 4049469047153
  • 0,15 kg

> 50 ab Lager verfügbar

3,56 € * 11,89 € * (70,04% gespart)

inkl. MwSt. zzgl. Versandkosten

Technische Details und Videos... mehr
Technische Details
Вращающийся: Нет
Материал: Латунь
Совместимость: Гибкий шланг (ПВХ, Силион, Неопрен)
Изготовитель: Phobya
Цвет: блестящий никель
Длина резьбы: Не указано
С одной стороны: 10/13 мм (внут.диа. 3/8" внеш.диа. 1/2")
Со второй стороны: 10/13 мм (внут.диа. 3/8" внеш.диа. 1/2")
Описание: Серия Phobya
Videos
Quick release couplings are usually derived from the pneumatics market. Due... mehr
Produktinformationen

Quick release couplings are usually derived from the pneumatics market. Due to this origin the seal of the couplings is often ensured by high air pressures. if such couplings which were designed for high air pressures are used in the watercooling sector with its low pressure it has happened in the past that leakages were the consequence. Phobya has addressed this issue and has designed a quick release coupling especially for watercooling applications. Therefore Phobya can now guarantee a perfect seal when the couplings are used in a watercooling system. As they were specially designed these couplings can not be used with air pressure but only with low-pressure water applications.
The Phobya quick coupling kit is self-sealing, meaning that the coupling can be separated without leakage even when the loop is filled. Both sides seal safely when separated, at most 1 to 2 drops can spill out (therefore not 100% leakage-free). These quick release couplings are ideal for external radiators as they allow quick and safe separation for transport. if you wish to make an external radiator easily separable you require two of these kits (1 to the radiator, 1 from the radiator).
This kit is designed as a bulkhead fitting, meaning that the female connector can easily be attached to the case.

Technical details:
Screw-on fitting for 13/10mm hoses (13mm outer- 10mm inner diameter)
Material: Silver nickel coated brass
M16 bulkhead thread
Only for low-pressure (max. 6 bar) water applications- not suitable for air pressure applications

Extent of delivery:
1x Female coupling
1x Male connector
2x Union nut
1x Counter nut

Please Note: The female connector's safety slide must be pulled back completely to ensure a tight seal when separated.

 

Awards
Fragen & Antworten... mehr
Fragen & Antworten
1 Frage(n) in anderen Sprachen.
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Frage von Guest #212377 vom 09. September 2016
Hatte zwei dieser verschlüsse eingebaut. die waren für c. zwei minuten dicht,, dann tropfte das wasser. Habe später einen neuen versuch gestartet als entlüftungsfventil oben am deckel radiator. Zum glück ragte der schlauch mit dem schottverschluss ca. fünf cm über den höchsten punkt des radiators heraus, ansonsten wäre mein 6000 eur PC schrott.Diese verschlüsse werden undicht und sind nicht zu empfehlen...
Antwort von Aquatuning GmbH vom 09. September 2016
Bitte melden Sie sich dazu bitte bei unserer RMA über ein Service TIcket, da wird Ihnen dann weitergeholfen: http://www.aquatuning.de/AtsdRma/guest
Haben Sie eine Frage?
Обратите внимание: Ваш вопрос будет общедоступным и может получить ответ от нашего сообщества, а также от нашей службы поддержки. Вы можете изменить свое общедоступное имя пользователя и свои настройки уведомлений по электронной почте в своей учетной записи клиента.
Bewertungen lesen, schreiben und diskutieren... mehr
Bewertungen
5 Звезды:
(0)
4 Звезды:
(1)
3 Звезды:
(0)
2 Звезды:
(0)
1 Звезды:
(0)
1 Рейтинг (ы) на других языках.
Нажмите здесь, чтобы посмотреть эти рейтинги.
написать отзыв
уведомление: Ваш отзыв будет опубликован после его очистки вручную.