- номер продукта: 35501
- Номер изготовителя.:
- ЕАН: 4049469176549
- вес: 5 kg
> 50 доступно на складе
Цены вкл. НДС плюс стоимость доставки
|Толщина:||M - 45 мм|
|Кол-во каналов охлаждения:||Медь|
|Резьба крепления вентиляторов:||M3|
|Кол-во ребер на дюйм:||12|
|Размер вентилятора:||140 мм, 200 мм|
|Кол-во вентиляторов:||4, 9|
|Давление опрессовки:||2 Бар|
|Габариты (Д x Ш x В):||440 x 420 x 45 мм|
This radiator can also be operated passively, the performance is plenty even for larger systems. For this purpose the fan grill can be removed to allow contact of the whole surface with the surrounding air which greatly improves passive cooling performance.
The radiator has 3 G1/4" connection threads for maximum fitting compatibility.
An additional new feature of the now completely black radiator are now the caps in brass black nickel. The sides on this version are mounted with a more complicated prodecdure which means that they are a bit more expensive but also look just great! More than that the V2 has not only copper fins, but also copper channels and copper chambers only the threads are made of brass. For those who what copper-only watersystems this radiator is the first choice.
Please note before and during installation
- Flush radiator before use
- The fan grill is loose until fans are mounted which fixate the grill
- Over-tightening of the screws can damage the radiator. Please make sure that the screws so not damage the radiator's fins. Damages due to improper use are not covered by the warranty.
- Other available M3 screws may be too long for use on this radiator. Make sure to only insert them so far that the radiator fins remain undamaged
- Material: Copper fins, copper channels, copper chambers, brass threads
- Dimensions: 440x420x45mm
- Connection threads: 3x G1/4"
- Weight: approx. 3025g
- Mounting possibility: 36x M3-threads on top (for 9x120mm fans)
- Pressure tested: 2bar
Extent of delivery
- 1x Radiator
- 1x fan grill 4x 200mm
- 1x fan grill 9x 140mm
- 36x M3x35mm screws
(If only 25mm fans to be fixed, in addition 30mm screws are necessary. These screws are not included!)
Warranty of seal and quality of manufacturing for 2 years.
The reddish brown "stains" on the fins is no rust. Please note that this is a copper radiator and the note: "The whole radiator was coated with a robust black lacquer. The fins are coated with a thinner layer to improve the appearance without compromising cooling performance.". The lacquer coat is made from the same material, hence the reddish-brown "stains".
The radiator can be damaged, if the screws are screwed too deep. Please pay attention to the right length of the screws. The screws do not have the same size in every delivery.
To avoid storage or manufacture-related residues in the circulation, Please rinse the radiator completely before assembling.
This product has been reviewed for you