- номер продукта: 1012358
- Номер изготовителя.: 13199
- ЕАН: 4250197131995
- вес: 1,162 kg
> 5 доступно на складе
Цены вкл. НДС плюс стоимость доставки
The step towards perfection
The new Alphacool AGB comes in three different models. You can either connect a Laing DDC, the Alphacool DC-LT or the Laing D5/Alphacool VPP655 at the backplate depending on the model which you use.
The brushed plate provides an optical finishing touch which is underlined by the high quality processing. The front consists of a scretch-secure soft-touch surface painted in black-matt.
The Eisfach is mounted in two of the front 5,25" bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back. Additionally, the Alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source.
A lot of details complement the first impression!
Two 1/4" holes at the top side are available for the first filling. To refill you can simply remove and extract the fillport in the front and two 1/4" holes at the bottom side facilitate the draining of the liquid. There are two lighting modules at the right hand side at the back of the container behind the window for 5mm LEDs. This provides a unique opportunity for personalised lighting and optic. Further two holes at the left hand side provide additional opportunities to fill or drain the liquid. The last two 1/4" threads are used to fill or drain the container. A Bubble Down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle.
material: plastic and metal
measurements (LxDxH): 148 x 118 x 84,5mm
connector thread: 10x 1/4"
lighting: 2x 5mm LED
The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.
This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.
Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.
The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.
This pump should be the first choice for your watercooling system.
Dimensions: 61 x 60 x 21mm
Color: Black nickel, black
Power consumption: 10W
Material: Brass, Stainless Steel, Aluminium oxide, hard coal
Maximum lifting height: 2,44m
Maximum system temperature: 60 ° C
Maximum flow: 200l / h
Voltage: 12V DC
Power connector: 4 Pin Molex
Tacho signal: 3-Pin Molex
Scope of delivery:
1x Alphacool Eisfach - Single Laing DDC - Dual 5,25 Bay Station incl. 1x Alphacool Laing DDC310 - black
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Подключение:||G1/4" внутренняя резьба|
|Заливка:||G1/4" внутренняя резьба|
|Совместимость с помпами:||Для Laing DDC|
|Отверстие под светодиод:||Доступно (для диодов 5 мм)|
|Модель резервуара:||2x 5 1/4" Bayres|