Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eisbecher 150mm Plexi reservoir

Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
Alphacool Eisbecher 150mm Plexi reservoir
  • 1011216
  • 15193
  • 4250197151931
  • 0,609 kg

> 50 доступно на складе

42,63 € *

Цены вкл. НДС плюс стоимость доставки

Рекомендуемые аксессуары
Дополнительный заряд
Alphacool Aurora LED Ring 60mm - red
1x
Alphacool Aurora LED Ring 60mm - red
15,66 €*
Alphacool Aurora LED Ring 60mm - white
1x
Alphacool Aurora LED Ring 60mm - white
14,67 €*
Alphacool Aurora LED Ring 60mm - uv
1x
Alphacool Aurora LED Ring 60mm - uv
15,66 €*
Alphacool Aurora LED Ring 60mm - blue
1x
Alphacool Aurora LED Ring 60mm - blue
15,66 €*
Alphacool Aurora LED Ring 60mm - green
1x
Alphacool Aurora LED Ring 60mm - green
15,66 €*
Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs
1x
Alphacool 120/140mm mounting bracket for Alphacool Eisbecher - 2 pcs
8,91 €*
Alphacool Aurora LED Ring 60mm - RGB
1x
Alphacool Aurora LED Ring 60mm - RGB
21,61 €*
Alphacool Aurora UV-kit for 150mm Eisbecher
1x
Alphacool Aurora UV-kit for 150mm Eisbecher
14,67 €*
Alphacool Steigröhrchen 150mm Eisbecher für Aurora UV-Kit
1x
Alphacool Steigröhrchen 150mm Eisbecher für Aurora UV-Kit
3,46 €*

Reinvent the tube   The Eisbecher Series consist of 20 different reservoirs that differ...more
Product Information


Reinvent the tube 

The Eisbecher Series consist of 20 different reservoirs that differ between usage, measurement and appearance. There are ten reservoirs within this series that consist of 99% plexi - totally unique! But the main difference between these reservoirs is within the functionality of the different sockets.


Constituents

Bubble Down
It is placed at the bottom of the reservoir to prevent turbulences that could lead air into the watercircle. 

Lighttower Standpipe
The "Lighttower" effect creates an astounding visual experience within every watercooling system. The Eisbecher supports this in two different ways: fluid coming from the bottom and coming from the top. The water is being led through the standpipe to the bottom or to the top where it splashes out of eight evenly distributed holes at the end of the pipe to the inner wall of the reservoir. This special watergame is the so called "Lighttower" effect. 

Stand
The known feet from the "Eisdecken" find its very way even to the Eisbecher and sustain every combination with a solid stand.


Mountings
There are two mountings placed above and under the pipe for fastening the lot in the casing. The holes in this mounting have a spacing of a 120/140 cooling fan.You can reduce the width of the mountings up to the width of the reservoir and there are three M4 threads availaible per mounting for fastening if you would rather not mount the reservoir at the fan space. These mountings are easily removeable especially when not being used. You will find these mountings on all 20 reservoirs.

Lighting module
The lighting modules consist of plexi and enable the lighting with a 5mm LED. These modules can be installed into all 1/4" holes. They are being used in the lid and occasionally in the socket of the reservoir. This facilitates a unique way to your personalised lighting effects.

Material
All models of the reservoir are availaible in acetal and plexi. So there is something for everone.

Measurements

All reservoirs are availaible in two different sizes: the 150mm version and the 10cm bigger 250mm version. The smaller reservoir comes with only one standpipe coming from the bottom because of its size and the bigger reservoir comes with two: one coming from the top and the other one from the bottom.











 

The Eisbecher

There are two additional versions for everyone that would rather operate the pump seperately. The Bubble Down and depending on the size one or two standpipes that fascilitate the "Lighttower" effect and two lighting modules one from the top and the other one from the bottom are being used here. And there are additional three LED holes for the plexi version to maximize the lighting power. The openings to fill or drain the liquid are doubled here: One at the side and one at the bottom.

Included in delivery:

  • 8x M4x8mm screw
  • 4x M4 nut
  • 2x G1/4" locking screw
  • 1x allen key 2,5mm

 

Measurements 150mm Version:
Measurements with mounting (LxWxD): 151 x 136 x 79,5mm
Measurements without mounting (LxW): 151 x 60mm

Diameter of the Plexitube: 60mm
Capacity: 180ml

Download 3D-file (.stp)

Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Notice:

In order to use the intake from the top, a G1/4” extension piece is necessary (article 1011183-1011186), since the screw thread is embedded a few mm into the lid and many compression fittings will not be able to be screwed in. 

Awards
Technical details and videos ... moor
Technical details
Изготовитель: Alphacool
Материал: Оргстекло
Цвет: Прозрачный
Совместимость с помпами: Для помп
Предустановленная помпа: Нет
Подключение: G1/4" внутренняя резьба
Заливка: G1/4" внутренняя резьба
Модель резервуара: Трубка - резервуар 60 мм
Отверстие под светодиод: Доступно (для диодов 5 мм)
Кол-во подключений: 6
Размеры: 60 x 60 x 150mm
Videos
Вопросы и Ответы more
Вопросы и Ответы
6 Вопрос (ы) на других языках.
Нажмите здесь, чтобы отобразить этот вопрос (ы).
Question from Axel J. from 02. February 2016
Ich wollte mal wissen, ob die LED`s dabei sind, oder ob man sie extra bestellen muss?
Answer from Aquatuning GmbH from 02. February 2016
Die werden extra bestellt :)
Answer from Daniel N. from 03. March 2016
Kann man den auch als standalone agb hernehmen?
Question from Christoph K. from 04. April 2016
Welche Gewindelänge ist nötig für den oberen Anschluss? Welcher Adapter/Verlängerung würde passen?
Answer from Aquatuning GmbH from 05. May 2016
Die Öffnung oben beim AGB ist zum Befüllen oder für ein Beleuchtungsmodul gedacht und geeignet. Für ein In oder Out ist es nicht so gut, weil es dann beim entlüften schwer ist die gesamte Luft zu entziehen.
Answer from Christoph K. from 05. May 2016
Ich möchte den oberen Anschluss als fill Port nutzen und bräuchte daher die nötige Gewindelänge.
Question from Julian B. from 06. June 2016
Wie wird der Alphacool Standfuß (Artikelnr.1012483) montiert?
Answer from Aquatuning GmbH from 07. July 2016
An diesem Artikel können die Standfüße nicht montiert werden. Sie benötigen einen anderen Aufsatz unten. Ein Beispiel ist Artikel 1011210. Dort sehen sie wie die Standfüße montiert werden.
Answer from Julian B. from 07. July 2016
Gibt es den Aufsatz auch einzeln? oder muss man sich einen anderen Behälter zu legen
Question from Philip H. from 07. July 2016
Guten Abend, der Artikel: 1011191 müsste doch an den beiden unteren Stellen passen?
Answer from Aquatuning GmbH from 07. July 2016
Passt ohne weiteres :)
Question from Guest #249754 from 07. July 2016
Welcher der unteren Anschlüsse muss für den Ein und welcher für den Ausgang genutzt werden ?
Answer from Aquatuning GmbH from 08. August 2016
Das macht hierbei keinen Unterschied, bei diesem Artikel können Sie frei wählen.
Question from Guest #252828 from 09. September 2016
Hallo, kann ich beim Eisbecher den Plexiglaskörper gegen den satinierten 60x150er Plexiglauszylinder (art: 46220) ersetzen?
Answer from Aquatuning GmbH from 09. September 2016
Ja das ist möglich.
у вас есть вопрос?
Обратите внимание: Ваш вопрос будет общедоступным и может получить ответ от нашего сообщества, а также от нашей службы поддержки. Вы можете изменить свое общедоступное имя пользователя и свои настройки уведомлений по электронной почте в своей учетной записи клиента.
Read, write and discuss reviews...more
Отзывы
5 Звезды:
(0)
4 Звезды:
(1)
3 Звезды:
(0)
2 Звезды:
(0)
1 Звезды:
(0)
1 Рейтинг (ы) на других языках.
Нажмите здесь, чтобы посмотреть эти рейтинги.
написать отзыв
уведомление: Ваш отзыв будет опубликован после его очистки вручную.