With these compression fittings, Alphacool has created another masterpiece. These connectors promise both absolute impermeability and high quality.
Fits all hard metal tubes with an outer diameter of 13mm. On the opposite side of the connector is the standard 1/4" thread. Available in deep black and chrome.
First, the swivel nut is placed onto the tube, followed by a plastic plate which protects the O-ring and then the thick O-ring itself. Now the tube can easily be inserted into the attachment, where the second O-ring is tightly fitted to the tube. The final step is to slide the swivel nut onto the attachment and screw it into place.
Due to its size, the swivel nut is not so easy to screw into place tightly. But even this was taken into account in the design, and so you can insert an 8mm hexagon wrench from underneath to hold the attachment tight.
Scope of Delivery:
- 1x compression fitting 13mm
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Длина резьбы:||5 мм|
|Со второй стороны:||G1/4" внешняя резьба|
|Габариты (Д x Ш x В):||22 x 22 x 17 мм|
|Совместимость:||Трубка из оргстекла, Медная трубка|
|С одной стороны:||10/13 мм (внут.диа. 3/8" внеш.диа. 1/2")|
Нажмите здесь, чтобы отобразить этот вопрос (ы).
Нажмите здесь, чтобы посмотреть эти рейтинги.
The double sealing really works well. Will use this also for my next build.