- номер продукта: 63022
- Номер изготовителя.:
- ЕАН: 4049469020576
- вес: 0,015 kg
Время доставки около 30 - 60 дней
The perfect seal fittings ensure, as the name implies, a perfect seal with 1/2" hoses (approx. 13mm inner diameter). A hose clamp is usually not required, as the fitting has a large outer diameter.
Technical specifications:
Thread size: G1/4
Thread length: 6mm
Compatible with hoses with an inner diameter of 13mm (1/2")
Fitting inner diameter: 10mm
Upper fitting outer ring: 15.8mm
Middle hose contact surface: 14.3mm
Key width: 16mm
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Вращающийся: | Нет |
Материал: | Латунь |
Длина резьбы: | 5 мм |
Совместимость: | Гибкий шланг (ПВХ, Силион, Неопрен), Твердая трубка (PUR) |
Со второй стороны: | G1/4" внешняя резьба |
Цвет: | блестящий никель |
Описание: | Форма: прямой |
Изготовитель: | Aquatuning |
С одной стороны: | Фитинги-елочки 12 & 13 мм (1/2") |